Baling press

Arno®Press K

 

ArnoPress K Series Baling Presses are suitable for compacting stamping press waste, such as steel, brass, copper and aluminium plates. The machines are available in five sizes, with 2 or 3 compactor steps. Models 100-2 to 600-2 compact in two steps, while models 100-3 to 350-3 compact the material three-dimensionally.

All parts of the presses coming into contact with scrap are lined with high-strength wear plates with a special wave-shaped profile. The solid welded construction design means that the machines can also be used for heavy continuous operation.

All presses have a graphic operator panel with visualisation of all process steps and can therefore be integrated easily into existing production lines and can be maintained via modem.

The main field of operation for this press series is the automotive industry and industrial stamping press lines with high waste volume.

Arno®Press D

 

The ArnoPress D Series Baling Press can be supplied in five sizes. Models 80-2 and 100-2 compact on two levels, and models 100-3 to 300-3 compact the material three-dimensionally. The first compression is carried out using a cutting head, which allows bulky parts to be reduced in size as well as achieving precompaction. All parts coming into contact with the scrap are lined with high-strength wear plates with a special trapeze-shaped profile. Each machine can be controlled manually or automatically.

Arno®Press-D-300
ArnoPress-K-200

Wear plates

Depending on the purpose of the press we offer wear plates with square-, trapezoid- and wave-shaped profiles in various material qualities.

Container

When the press is installed outdoors electrical and hydraulic components can be placed in containers, which also offer additional noise protection and reduction.

Mobility

The smaller presses of this series can be equipped witha chassis and the mobility can be further increased byadding loading cranes.

Hydraulic tank

The two-chamber system guarantees the supply of filtered and cooled oil to the performance-controlled hydraulic pumps.

PZT Pump activation technology

The pump activation technology regulates the required quantity of oil per cylinder, thereby minimising the necessary drive power of the press.

[vc_wp_text]
Technical Data Arno®Press K100-2100-3200-3350-3400-3600-2
Bale size standardmm300x300300x300300x300400x400400x600760x1100
Bale size optionalmm400x400400x400400x400300x300-1000x1000
Power main cylinderkN100010002000350040006000
Bale density steelkg/dm3<3,0<3,0<3,5<3,5<3<1,5
Bale density aluminiumkg/dm3<1,2<1,2<1,2<1,5<1,2<1,0
Bale density copperkg/dm3<3,5<3,5<4,0<4,0<3,5<1,5
Capacity steelt/h<5,0<7<14<30<40<60
Capacity aluminiumt/h<2,5<4,5<7,0<12<15<40
Capacity coppert/h<7,5<8,5<16,0<35<40<60
Cycle times4540252931100
Power standardkW3745110220220220
Installation surfacem x m 6 x 3,84,0 x 3,85,5 x 78,2 x 7,68,5 x 810,7 x 8,1
[/vc_wp_text]
[vc_wp_text]
Technical Data Arno®Press D80-2100-2100-3150-3300-3500-3800-3
Bale size standardmm400x300600x200300x300400x400600x400600x600600x600
Bale size optionalmm-600x400400x400600x400400x400600x400-
Power main cylinderkN800100010001500300050008000
Bale density steelkg/dm3<2,0<2,5<3,0<3,0<3,0<3-
Bale density aluminiumkg/dm3<1,0<1,0<1,2<1,2<1,2<1,2-
Bale density copperkg/dm3<3,5<3,5<1,5<3,5<4,0<3,5-
Capacity steelt/h<2<4<5<10<20<30-
Capacity aluminiumt/h<0,8<1,2<2,4<4,0<11,0<15-
Capacity coppert/h<2,5<4,5<6,0<12,0<22<35-
Cycle times45455050556596
Power standardkW22223074220220300
Installation surfacem x m 4 x 1,65 x 1,66,2 x 3,87,5 x 710 x 810,5 x 8,210,5 x 9
[/vc_wp_text]