The Arno®Brik series of briquetting presses is suitable for pressing and/or briquetting all types of chips produced during the machining of steel, cast iron, stainless steel, aluminum, magnesium, brass, copper, bronze, titanium, etc. Special powder alloys, slag compounds, battery waste, and grinding sludge from a wide variety of materials can also be processed, as well as tire steel and mill scale.
Compared to loose chips, compressed briquettes can be melted down more easily and safely. Briquetting grinding sludge enables an environmentally friendly recovery of fluids. The presses are available with three different filling variants to meet the material’s flow properties. An inclined feed hopper or a two-stage feeding mechanism allows the processing of both grinding sludge and drilling chips.
The solid, welded design with two or three columns makes the machines suitable for heavy-duty continuous operation. Each machine can be operated manually or automatically. All process sequences are visualized on a graphical control panel and can be easily integrated into fully automated production lines. Remote maintenance and system adjustments can of course also be carried out.
Arno®Brik | English
Arno®Brik 5
-
Movable tool frame
Enormous reduction of wear in the press box: The movable tool frame compensates for relative movement during the compression phase.
-
High-density briquettes
Excellent transport and melting properties thanks to high briquette compression.
-
2-column technology
Maximum variability in tool loading. The columns with patented locknuts handle millions of compression cycles at full load.
-
Compact design
Minimal space requirement due to the compact machine design.
-
Energy efficiency
Up to 20% higher than the competition: optimized pump control technology with innovative volume flow control of the main cylinder.
-
Fluid recovery
Up to 20% higher than the competition: optimized pump control technology with innovative volume flow control of the main cylinder. Fluid recovery
Collection tank with pumps for fluid recovery. Presses for grinding sludge can be equipped with a sludge conveyor. -
Material-appropriate feeding
Feeding variants can be adapted to optimally capture the input material.
-
Press tool know-how
Various tool diameters optimize briquette quality and performance, while material selection extends service life.
-
Material dosing via weigh system
Process-reliable briquetting with a defined briquette length.
| Briquettediameter | mm | 50-70 | Standard drive power | kW | 15 |
| Main cylinder power | kN | 760 | Minimum required footprint | m x m | 1,5 x 3,5 |
| Capacity (steel, cast iron) | t/h | <0,3 | Briquette density (steel, cast iron) | dm³ | <5,5 |
| Capacity (aluminum) | t/h | <0,15 | Briquette density (aluminum) | dm³ | <2,4 |
| Capacity (brass, copper) | t/h | <0,15 | Briquette density (brass, copper) | dm³ | <7,0 |
Arno®Brik 7
Movable tool frame
Enormous reduction of wear in the press box: The movable tool frame compensates for relative movement during the compression phase.
High-density briquettes
Excellent transport and melting properties thanks to high briquette compression.
2-column technology
Maximum variability in tool unloading. The columns with patented locknuts handle millions of compression cycles at full load.
Compact design
Minimal space requirement due to the compact machine design.
Energy efficiency
Up to 20% higher than the competition: optimized power consumption with unchanged volume reduction of the main cylinder.
Fluid recovery
Collection tank with pumps for fluid recovery. Presses for grinding sludge can be equipped with a sludge conveyor.
Material-appropriate feeding
Feeding variants can be adapted to optimally capture the input material.
Press tool know-how
Various tool designs optimize briquette quality and performance, while material selection extends service life.
Material dosing via weigh system
Process-reliable briquetting with a defined briquette length.
| Briquettediameter | mm | 70-90 | Standard drive power | kW | 22 |
| Main cylinder power | kN | 1.400 | Minimum required footprint | m x m | 1,8 x 3,5 |
| Capacity (steel, cast iron) | t/h | <0,5 | Briquette density (steel, cast iron) | dm³ | <5,5 |
| Capacity (aluminum) | t/h | <0,25 | Briquette density (aluminum) | dm³ | <2,4 |
| Capacity (brass, copper) | t/h | <0,25 | Briquette density (brass, copper) | dm³ | <7,0 |
Arno®Brik 10
Movable tool frame
Enormous reduction of wear in the press box: The movable tool frame compensates for relative movement during the compression phase.
Material-appropriate feeding
Feeding variants can be adapted to optimally capture the input material.
2-column technology
Maximum variability in tool unloading. The columns with patented locknuts handle millions of compression cycles at full load.
Filling valve on the press cylinder from AB10 onward
ATM presses set new standards: With the innovative filling valve technology, up to 30% of the drive power can be saved.
High-density briquettes
Excellent transport and melting properties thanks to high briquette compression.
PZT pump switching technology
The PZT regulates the flow rate per cylinder and minimizes pressure losses in the hydraulic system.
Press tool know-how
Different tool diameters ensure optimal briquette quality and performance, while various materials increase service life.
Hydraulic tank
Longer pump life due to filtered and cooled oil in the two-chamber system.
Energy efficiency
Up to 20% higher than the competition: optimized pump control technology with innovative volume flow control of the main cylinder.
Material dosing via weigh system
Process-reliable briquetting with a defined briquette length.
| Briquettediameter | mm | 105-135 | Standard drive power | kW | 60 |
| Main cylinder power | kN | 2.900 | Minimum required footprint | m x m | 3,6 x 4,6 |
| Capacity (steel, cast iron) | t/h | <1,5 | Briquette density (steel, cast iron) | dm³ | <5,5 |
| Capacity (aluminum) | t/h | <0,6 | Briquette density (aluminum) | dm³ | <2,4 |
| Capacity (brass, copper) | t/h | <2,0 | Briquette density (brass, copper) | dm³ | <7,0 |
Arno®Brik 12
Press tool know-how
Different tool diameters ensure optimal briquette quality and performance, while various materials increase service life.
Hydraulic tank
Longer pump life due to filtered and cooled oil in the two-chamber system.
Energy efficiency
Up to 20% higher than the competition: optimized pump control technology with innovative volume flow control of the main cylinder.
Material dosing via weigh system
Process-reliable briquetting with a defined briquette length.
Movable tool frame
Enormous reduction of wear in the press box: The movable tool frame compensates for relative movement during the compression phase.
Material-appropriate feeding
Feeding variants can be adapted to optimally capture the input material.
3-column technology
Maximum variability in tool loading. The columns with patented locknuts handle millions of compression cycles at full load.
Filling valve on the press cylinder from AB10 onward
ATM presses set new standards: With the innovative filling valve technology, more than 30% of the drive power can be saved.
High-density briquettes
Excellent transport and melting properties thanks to high briquette compression.
PZT pump switching technology
The PZT regulates the flow rate per cylinder and minimizes pressure losses in the hydraulic system.
| Briquettediameter | mm | 125-140 | Standard drive power | kW | 90 |
| Main cylinder power | kN | 4.200 | Minimum required footprint | m x m | 4,5 x 5,5 |
| Capacity (steel, cast iron) | t/h | <2,5 | Briquette density (steel, cast iron) | dm³ | <5,5 |
| Capacity (aluminum) | t/h | <1,1 | Briquette density (aluminum) | dm³ | <2,4 |
| Capacity (brass, copper) | t/h | <3,0 | Briquette density (brass, copper) | dm³ | <7,0 |
Arno®Brik 15
Press tool know-how
Different tool diameters ensure optimal briquette quality and performance, while various materials increase service life.
Hydraulic tank
Longer pump life due to filtered and cooled oil in the two-chamber system.
Energy efficiency
Up to 20% higher than the competition: optimized pump control technology with innovative volume flow control of the main cylinder.
Material dosing via weigh system
Process-reliable briquetting with a defined briquette length.
Movable tool frame
Enormous reduction of wear in the press box: The movable tool frame compensates for relative movement during the compression phase.
Material-appropriate feeding
Feeding variants can be adapted to optimally capture the input material.
3-column technology
Maximum variability in tool loading. The columns with patented locknuts handle millions of compression cycles at full load.
Filling valve on the press cylinder from AB10 onward
ATM presses set new standards: With the innovative filling valve technology, more than 30% of the drive power can be saved.
High-density briquettes
Excellent transport and melting properties thanks to high briquette compression.
PZT pump switching technology
The PZT regulates the flow rate per cylinder and minimizes pressure losses in the hydraulic system.
| Briquettediameter | mm | 140-150 | Standard drive power | kW | 120 |
| Main cylinder power | kN | 5.200 | Minimum required footprint | m x m | 6,0 x 6,5 |
| Capacity (steel, cast iron) | t/h | <4,5 | Briquette density (steel, cast iron) | dm³ | <5,5 |
| Capacity (aluminum) | t/h | <2,2 | Briquette density (aluminum) | dm³ | <2,4 |
| Capacity (brass, copper) | t/h | <5,0 | Briquette density (brass, copper) | dm³ | <7,0 |
Arno®Brik 18
Press tool know-how
Different tool diameters ensure optimal briquette quality and performance, while various materials increase service life.
Hydraulic tank
Longer pump life due to filtered and cooled oil in the two-chamber system.
Energy efficiency
Up to 20% higher than the competition: optimized pump control technology with innovative volume flow control of the main cylinder.
Material dosing via weigh system
Process-reliable briquetting with a defined briquette length.
Movable tool frame
Enormous reduction of wear in the press box: The movable tool frame compensates for relative movement during the compression phase.
Material-appropriate feeding
Feeding variants can be adapted to optimally capture the input material.
3-column technology
Maximum variability in tool loading. The columns with patented locknuts handle millions of compression cycles at full load.
Filling valve on the press cylinder from AB10 onward
ATM presses set new standards: With the innovative filling valve technology, more than 30% of the drive power can be saved.
High-density briquettes
Excellent transport and melting properties thanks to high briquette compression.
PZT pump switching technology
The PZT regulates the flow rate per cylinder and minimizes pressure losses in the hydraulic system.
| Briquettediameter | mm | 180-195 | Standard drive power | kW | 180 |
| Main cylinder power | kN | 8.500 | Minimum required footprint | m x m | 6,5 x 8,5 |
| Capacity (steel, cast iron) | t/h | <7,5 | Briquette density (steel, cast iron) | dm³ | <5,5 |
| Capacity (aluminum) | t/h | <3,5 | Briquette density (aluminum) | dm³ | <2,4 |
| Capacity (brass, copper) | t/h | <8,0 | Briquette density (brass, copper) | dm³ | <7,0 |
Arno®Brik 22
Press tool know-how
Different tool diameters ensure optimal briquette quality and performance, while various materials increase service life.
Hydraulic tank
Longer pump life due to filtered and cooled oil in the two-chamber system.
High-density briquettes
Excellent transport and melting properties thanks to high briquette compression.
PZT pump activation technology
The PZT regulates the required oil volume per cylinder and thus minimizes the necessary drive power of the press.
Energy efficiency
Up to 20% higher than the competition: optimized pump control technology with innovative volume flow control of the main cylinder.
Movable tool frame
Enormous reduction of wear in the press box: The movable tool frame compensates for relative movement during the compression phase.
Material-appropriate feeding
Feeding variants can be adapted to optimally capture the material.
3-column technology
Maximum variability in tool loading. Columns with patented locknuts handle millions of compression cycles at full load.
Filling valve on the press cylinder from AB10 onward
ATM presses set new standards: More than 30% of the drive power can be saved through the innovative filling valve technology.
Material dosing via weigh system
Process-reliable briquetting with a defined briquette length.
| Briquettediameter | mm | 220-240 | Standard drive power | kW | 300 |
| Main cylinder power | kN | 12500 | Minimum required footprint | m x m | 7,5 x 9,0 |
| Capacity (steel, cast iron) | t/h | <12,0 | Briquette density (steel, cast iron) | dm³ | <5,5 |
| Capacity (aluminum) | t/h | <5,0 | Briquette density (aluminum) | dm³ | <2,4 |
| Capacity (brass, copper) | t/h | <10,0 | Briquette density (brass, copper) | dm³ | <7,0 |
Personal consultation:
Contact us for individual consultation and customized solutions tailored to your specific requirements.
