Single-Shaft Shredders

ArnoShred


Arno®Shred SS

Arno®Shred SS - the perfect choice for swarf shredding. The compact single-shaft shredder with the proven rotor-stator principle.
Our single-shaft shredder guarantees problem-free operation by reliable technology.
The proven SS series are machines of powerful single-shaft shredders, which are primarily used for crushing metal chips.
Through continuous development in collaboration with the industry, the Arno®Shred SS series ensures flawless operation.
Our single-shaft shredders are modularly configurable and tailored with cutting discs specifically for your material.


Quick-change system
Quick in - quick out! Our quick-change system enormously shortens the downtime when changing shredder blades.

Knifes
About 80 blade geometries with 12 different diameters and different blade widths are available.

Knife quality
Our knives are available in different materials and hardness as well as in hard metal.

Wear plates
Depending on the application, we also supply wear plates in highly tempered or food grade quality.

Experience
The technology of our crushers is based on more than 30 years of experience with several hundred plants supplied from Industrie Service Drüge.

Additional equipment
To maximize performance, we also offer auxiliary devices such as feed paddles, feed and discharge conveyors and suction systems.

Monitoring
Our control systems are designed to be integrated into production line systems, monitored via modem / VPN. They feature a PLC-controlled reversing and shutdown automatic.


Please find all technical details on page 12 of our folder!

Arno®Shred SSE

Specially designed for metals. All surfaces are covered with high resistance Hardox wear plates. Knifes and screens with different geometrical forms and in different materials are available.

The innovating feature is the tramp metal discharge opening. All lump parts are ejected during the shredding process to protect the tool and increase it‘s lifetime. Additionally a friction clutch protects the drive mechanism against overload.

Thereby the ArnoShred resists extreme conditions on scrap yards.


Wear Plates
Depending on the purpose of the shredder we offer wear plates in various material qualities.

Knifes
About 80 blade geometries with 12 different diameters and different blade widths are available.

Friction Clutch
Our machines are equipped with a friction clutch to avoid damages of the axle.

Tramp Metal Discharge
If needed, hard metal pieces can be ejected automatically into a separate container, to guarantee clean material for the following processes.

Hydraulic or Pneumatic Drive
All the cyclinders (feed and material ejection) can be driven by hydraulic or pneumatic devices.

Drive Mechanism
The drive mechanism depends on the size of the machine. (gearbox or belt-drive)

Patented Feed System
For optimal distribution to the shaft, there are up to 3 feeders available.

Energy Saving System
Due to the patented tramp material ejection and the friction clutch less energy for cutting is needed, compared to standard machines.


Please find all technical details on page 12 of our folder!

Shredder
Shredder
Shredder
Shredder
Shredder
 

Multi Shaft Shredder

Arno®Shred DS

The powerful and efficient rotary shear - a double shaft shredder - is often used in the pre-crushing of metal, tyres, e-waste or plastic.

The cutting discs shred the input material in the longitudinal direction. With additional fitted transverse blades,the material is crushed to defined piece sizes.

With special granulator blades and screen baskets, the double shaft shredder can also be used for fine crushing.
For swarf shredding at high throughput rates, the ArnoShred DS is available with with double rotor design and stator blades on both sides.


Quick Change System
Quick in - quick out! Our quick-change system reduces enormously the downtime when changing the blade.

Knives
About 80 blade geometries with 12 different diameters and different knife widths are available.

Knife Quality
Our knives are available in different materials and hardness as well as in hard metal.

Wear Plates
Depending on the application, we also supply wear plates in highly tempered or food grade quality.

Experience
The technology of our shredder is based on more than30 years experience with several hundred plants supplied from Industrie Service Drüge.

Additional equipment
To maximize performance, we also offer auxiliary devices such as feed paddles, feed and discharge conveyors and suction systems.

Monitoring
Our control systems are designed to be integrated into production line systems, monitored via modem / VPN. They feature a PLC-controlled reversing and shutdown automatic.


Please find all technical details on page 12 of our folder!

Arno®Shred QS

Arno®Shred for shredding various materials.

Due to the solid construction, the high-performance and robust cutting unit the ArnoShred QS four-shaft shredder is suitable for continuous operation.

Depending on the material and bulk density, different blade geometries (eg rip hook or pelletizing function) are used. In this way precisely defined particle sizes can be crushed and also bulky material can be crushed efficiently. A combination of rotary shear and four-shaft shredding ensures maximum process reliability and economical operation.


Quick Change System
Quick in - quick out! Our quick-change system reduces enormously the downtime when changing the blade.

Knives
About 80 blade geometries with 12 different diameters and different knife widths are available.

Knife Quality
Our knives are available in different materials and hardness as well as in hard metal.

Wear Plates
Depending on the application, we also supply wear plates in highly tempered or food grade quality.

Experience
The technology of our shredder is based on more than30 years experience with several hundred plants supplied from Industrie Service Drüge.

Additional equipment
To maximize performance, we also offer auxiliary devices such as feed paddles, feed and discharge conveyors and suction systems.

Monitoring
Our control systems are designed to be integrated into production line systems, monitored via modem / VPN. They feature a PLC-controlled reversing and shutdown automatic.


Please find all technical details on page 12 of our folder!

Alfred ORTNER

Phone: +43 (0) 3573 / 27 5 27 - 120
Mobile: +43 (0) 664 / 38 44 474
E-Mail: a.ortner@atm-recyclingsystems.com

Ing. Franz DUSPIVA

Phone: +43 (0) 3573 / 27 5 27 - 130
Mobile: +43 (0) 664 / 84 90 838
E-Mail: f.duspiva@atm-recyclingsystems.com

  1. Callback